[SI-LIST] FastCap - How to use it?

Fatima,

I did some work putting a UI around some parameterized structures for
Quantic EMC's Greenfield 3d (http://www.quantic-emc.com) that used
FastCap and FastHenry for the solvers.
The visualization was done by using Fastcap's Postscript viewer. If
I remember correctly the hidden line removal used an n^2 algorithm
making it a CPU hog, so I suggest you use the switch to turn that off.

Setting up new structures is a bit painful as it uses text files.

You should find more info at http://www.fastfieldsolvers.com

I hope this helps a bit!



Regards

Mike


Mike Ventham
Chief Technical Consultant
Double V Design & Support Services
EDA Interfaces and Custom Software
Tel   : 44 (0)1749 871104
Email : mike@xxxxxxxxxxxxxxxxxxx
Web   : http://www.doublevdesign.co.uk 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: