You might look at: http://www.ohmega.com/ or http://www.smtplus.com/ "Putting Buried Resistors Into Your Printed Circuit Boards" by James Blankenhorn Regards, jf -----Original Message----- From: Neu, Thomas [mailto:tneu@xxxxxx] Sent: Monday, February 17, 2003 10:36 AM To: Si-List (E-mail) Subject: [SI-LIST] Resistor in Board Hi, Does anybody know how to implement resistors in boards. For example, I would like to have a 50Ohm resistor to ground inside the pcb. Is there a way to design that? Thanks! Tommy ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu