Dear Si'ers,
I am using a ATF-55143 Single Voltage E-pHEMT Low Current Low
Noise device in an RF front end application. I need to make sure I am
complient with contact ESD to +/-8KV. The device has an absolute maximum
rating of +1V to -5V. Therefore the CM1213 I am using which is great as a
very low capacitance ESD device, but of no use, since its break down voltage
is +/-9V.
Anybody got any ideas as to how to use the ATF-55143 device and ESD protect
it without loading it with high capacitive ESD devices in my front end
application.
Regards
Steve
GullWing Ltd
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu