[SI-LIST] Re: ERROR CALCULATIONS

  • From: steve weir <weirsp@xxxxxxxxxx>
  • To: mmoeller@xxxxxxxxxxxxxxx,"Si-List (E-mail)" <si-list@xxxxxxxxxxxxx>
  • Date: Tue, 21 Oct 2003 12:11:25 -0700

Merrick, Matlab and to a lesser extent MathCad can do spline fitting.

Regards,


Steve.
At 01:55 PM 10/21/2003 -0500, Moeller, Merrick wrote:
>Hello,
>         I'm looking for a resource that can help me
>calculate curve fit error between a measured and optimized set
>of data.
>Regards,
>
>Merrick M. Moeller
>Design Engineer Electrical
>Cinch Connectors INC.
>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
>                 //www.freelists.org/archives/si-list
>or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: