[SI-LIST] EMC test

Hi gurus,
I have some question about the setup test for EN55022.

My product is a cpe that has some lan interface 10/100baseT, an aDSL
port and a WiFi access point. I have to perform test compliance to the
ETSI 301-489-1 and 301-489-17 for the WiFi part, and the EN55022 for all
device parts.

My question is about the EN55022 setup, when I measure the emission in
semi-anechoic chamber I have to put some device (i. e. a pc) in the
chamber to ensure that there is traffic on the WiFi link, or it is not
necessary and I have only the link up, since I've done the ETSI test? 

Obviously all other ports are connected to devices that are not in the
chamber. 

 

Any suggestion is very appreciated.

Thanks a lot

Carlo

 

 

Carlo Bleu

---------------------------------------

Hardware Design Engineer

Allied Telesis Multimedia S.r.l.
P.zza Tirana 24/4B - 20147 Milano MI - Italy

Office     +39 02 41304306 (ext. 306)
Fax         +39 02 41304351

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: