[SI-LIST] Dust and humidity impact on the signal

Hi,

I try to simulate the dust and humidity impact on 10G differential
signal routed as micro strip on the board. I know that the dust
thickness and humidity can vary significantly, but I wonder what would
be a good approach, for start, to build the corresponding model in a 3D
simulation tool (suggestions on dk, df).

Thanks,
Dorin



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: