[SI-LIST] Re: Do i have to use microstrip lines?

  • From: ray jiang <jlray2000@xxxxxxxxx>
  • To: steve weir <weirsi@xxxxxxxxxx>
  • Date: Thu, 19 May 2005 00:25:06 +0800

Thanks all for your kind help. Your advices are very useful to me!

Ray

On 5/16/05, steve weir <weirsi@xxxxxxxxxx> wrote:
> Ray, at 622mbps, the rise time is likely in the neighborhood of 300ps or
> so.  In 300ps, how far do you think you can go before transmission line
> effects are significant?  How much timing budget can you sacrifice to
> reflections?
>=20
> As to microstrip, the vendor is probably concerned about via stubs.
>=20
> Steve.
>=20
> At 10:38 PM 5/15/2005 +0800, ray jiang wrote:
> >Hello all,
> >     I am designing a high speed board. The signal rate between two
> >components is 622Mbps, according to the datasheet, i have to use
> >microstrip lines whose characteristic impedance is 50Omh. If i put the
> >two components very close and connect the signal line as short as
> >possible, can i avoid using microstrip lines? i think this frequency
> >is not so high that microstirp lines have to be used. Can any one give
> >any comments and ideas? Thank you a lot!
> >
> >--=3D20
> >Best Regards,
> >Ray Jiang
> >------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> >or to administer your membership from a web page, go to:
> >//www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> >List FAQ wiki page is located at:
> >                 http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> >
> >List technical documents are available at:
> >                 http://www.si-list.org
> >
> >List archives are viewable at:
> >                 //www.freelists.org/archives/si-list
> >or at our remote archives:
> >                 http://groups.yahoo.com/group/si-list/messages
> >Old (prior to June 6, 2001) list archives are viewable at:
> >                 http://www.qsl.net/wb6tpu
> >
>=20
>=20


--=20
Best Regards,
Ray Jiang
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: