[SI-LIST] Diode in test load

From: Virendra <adsurevv@xxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Wed, 20 Nov 2002 13:59:55 -0800 (PST)

Hello all,
Can someone pl. tell me how i can incorporate a diode
in the test load of an IBIS model. I am trying to draw
a picture of the test setup below.  The diode is in
series with the RL.


           -----1.3V
              |
              |
             ---
              Diode
             ---
              |
              |
            ____
             Diode
            ----
              |
             ____
              Rl
             ____
              |

DUT   --------|--------------OUT
              |
             ____
             Cl
             ----
              |
              |
            ----GND          

Thanks in advance,

Virendra

Virendra Adsure
viru@xxxxxxxx


__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] Diode in test load

Other related posts: