All, I have a question on something I read about diode termination. Howard Johnson in one of his answers to a diode termination question says the following: One equation of interest regarding the theory of diode terminations is the relation between the incident signal amplitude traveling down a transmission line (I), the amplitude of the signal reflected at the end of a line (R), and the amplitude of the signal that exits the line and is apparent at the load (T). I am clear about "I" and "R". But what does "T" mean? I thought there was just signal incident and signal reflected. Is there a signal "Exiting"?? Also, if this is explained, the next question is, what does he mean by: In English, the signal at the end of the line is the superposition of whatever came in, plus whatever bounced back toward the driver. This same equation may be re-written to express "R" as a function of "T" and "I": R = T - I Can someone please clarify the above equation?? Thanks in advance. Regards, Ria. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu