[SI-LIST] Re: Differential Signal at driver andintermediatepoints in xtk

Jon Powell  Wrote:

 > I don't remember in exactly which menu pulldown it is (maybe PARAMETERS?
 > (there are only 3 or 4 choices)) but there is a control for showing the
 > signals in a differential pair as either differential or single.
>

Dear Jon:

You are probably referring to:

options -> Defaults

Then "Waveform Defaults"  allows Enabling or Disabling "View Differential".

Best Regards,

Abe Riazi
ServerWorks.
  




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: