Revered Gurus, I am simulating a differential pair in xtk ( unix). I am able to get the differential signal / waveform at the receiver end. But the xns shows single ended signals at the driver and at the intermediate test points. The test points are modelled as caps ( CEFF: 1.0). How can we get the differential signals at the drivers / intermediate points / test points. Are the differential signals at the these points just the algebraic difference of single ended signals ? Regards and thanks, Vikas Shukla _________________________________________________________________ Hot new gizmos. Check 'em out. http://www.msn.co.in/Computing/Gizmos/ Right now! ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: http://www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: http://www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu