[SI-LIST] Re: Data Bus termination

Mahesh,
 
Usually the Series resistor should be placed near the Processor as Processor 
drives more current. If you are using HyperLynx, it will give you the distance 
also where you should put the Termination resistor using What-if Analysis.
 
Thanks,
Darshan Mehta
steve weir <weirsi@xxxxxxxxxx> wrote:
Mahesh, what does your simulation indicate?

Steve.
At 01:01 PM 6/29/2005 +0530, mahesh.linge@xxxxxxxxx wrote:

>Hi,
>I have Processor Flash and SDRAM on my board.My data bus is running at
>125 MHz.I would like to know placement of the series termination
>resistors on the data bus as it will be a bisectional.
>
>Thanks in advance.
>
>Regards,
>Mahesh
>
>
>
>Confidentiality Notice=0D
>
>The information contained in this electronic message and any attachments to=
> this message are intended
>for the exclusive use of the addressee(s) and may contain confidential or=
> privileged information. If
>you are not the intended recipient, please notify the sender at Wipro or=
> Mailadmin@xxxxxxxxx immediately
>and destroy all copies of this message and any attachments.
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
http://www.si-list.org

List archives are viewable at: 
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: