Tektronix has an older software package called "RT Eye" (I believe) that does analysis on eye diagrams acquired with their real-time scope. Not sure if it can work from saved .CSV files though. Wolfgang Mustafa Özgür TUTUM <mustafa.tutum@xxxxxxxxxxxxx> Sent by: si-list-bounce@xxxxxxxxxxxxx 07/10/2008 02:09 AM To <si-list@xxxxxxxxxxxxx> cc Subject [SI-LIST] DDR2/DDR3 Dear all We have TDS6804 8GHz scope and 20GHz differential probes. We are looking = for setup and hold times of DDR2 signals. But I want a SW that = constructs an eye diagram for DDR2 and DDR3 which takes the .csv file = from the scope. Is there any one who use such program?=20 Thanks Mustafa ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu