[SI-LIST] Re: DDR2 design issues?
- From: steve weir <weirsi@xxxxxxxxxx>
- To: sreekanthn <sreekanthn@xxxxxxxxxxxxxxx>
- Date: Tue, 25 Mar 2008 23:05:08 -0700
sreekanthn, ODT is disabled by default. The answers to the questions
you have been asking are available in the DDR2 spec available from
JEDEC. You really should obtain a copy. I also think you would be well
served to follow Bill Wurst's advice about seeking some experienced help.
Steve
sreekanthn wrote:
> Hi,
>
> In my Understanding, OnDieTermination(ODT) is the option given in DDR2
> in which 50/75/150 Ohms can be configured. We can disable the ODT and use
> external termination, if our simulation demands value other than the above
> specified.
>
> Best Regards,
> Sreekanth N Nampoothiri
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
> Behalf Of icer world
> Sent: Tuesday, March 25, 2008 5:31 PM
> To: SI LIST
> Subject: [SI-LIST] DDR2 design issues?
>
> hello everyone:
> I will use DDR2 in my design ,and the DDR2 controller surpport ODT
> function .I think if I take use of ODT function ,pull-up resistor connected
> to VTT (0.5VDD) will not be needed in all the signal pins.But I got a demo
> design from chip applier that use 50ohm pull-up resistor connected to VTT
> in all the signal pins.Can anyone tell me whether pull-up resistor connected
> to VTT is needed in my design?If needed,please tell me how to design it
> ,thanks!
>
>
> ____________________________________________________________________________
> ________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile. Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain proprietary, confidential or privileged information. If you are not
> the intended recipient, you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately and destroy all copies of this
> message and any attachments contained in it.
>
> Contact your Administrator for further information.
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
--
Steve Weir
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
California office
(408) 884-3985 Business
(707) 780-1951 Fax
Main office
(401) 284-1827 Business
(401) 284-1840 Fax
Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax
http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: DDR2 design issues?
- From: sreekanthn
Other related posts:
- » [SI-LIST] DDR2 design issues?
- » [SI-LIST] Re: DDR2 design issues?
- » [SI-LIST] Re: DDR2 design issues?
- » [SI-LIST] Re: DDR2 design issues?
- [SI-LIST] Re: DDR2 design issues?
- From: sreekanthn