Chris, I did just that, read the subject line, and responded to the seemingly GENERAL question Charles was asking which was: "Please explain pseudo diff". But enough said, let's put this aside and talk about more important things... Arpad =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] = On Behalf Of Chris Cheng Sent: Friday, July 22, 2005 12:14 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: DDR Vref Bypassing - Please explain pseudo diff I think if you read the subject title and Charles question you will be = =3D less confused. What do Vref and DDR have anything to do with your driver = =3D scheme ? ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: http://www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: http://www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu