[SI-LIST] DC resistance of the Power Supply on PCB

From: Zhangkun <zhang_kun@xxxxxxxxxx>
To: si-list <si-list@xxxxxxxxxxxxx>
Date: Wed, 30 Nov 2005 21:09:28 +0800

Dear all
In our testing, we often use multimeter to measure the DC resistance of power 
net, while the product is powered off. Sometime, the measure result is about 1 
ohm. I do not understand why. 

Please give me some advice.

Best Regards

Zhangkun
2005.11.30


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: DC resistance of the Power Supply on PCB
From: Andrew Ingraham

[SI-LIST] DC resistance of the Power Supply on PCB

Other related posts: