[SI-LIST] Re: DC data

Many thanks for the reply. Let me put it this way. Let's say I have a  
noisy data that follows a sinusoidal curve. This data is in time  
domain. How can I get a smooth sinusoidal curve?

I can also put it in a different way. My data is a sinusoidal curve  
with say 2mV peak-to-peak dynamic noise.
How can I get a smooth clean sinusoidal curve.

I hope I described it in a clear way.

Many thanks,
Jenni



On Jun 23, 2009, at 5:22 PM, Joseph.Schachner@xxxxxxxxxx wrote:

> I'm not sure I understand the question.
>
> You wrote:
> I have a set of noisy transient data where the DC level moves up and
> down.
> Is the DC moving up and down due to the transients?  I mean, does it  
> look
> like this, where the "DC" is lower after a positive transient?:
> (Embedded image moved to file: pic22704.jpg)
>
>
> Or is the DC slowly varying and has nothing to do with the transients?
>
> The answer is  different for these two possibilities.
>
> --- Joe S.
> <pic22704.jpg>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: