[SI-LIST] Customizing ADS Components - Ideal Delay Line

Hi,
In a recent class given by Eric Bogatin, a student was puzzled by the ideal 
transmission line in ADS. Microwave folk specify such a line with electrical 
length in degrees phase shift at a certain frequency. The student preferred to 
think in terms of time delay. How to specify the same physical component in 
terms of nanoseconds delay?

I thought the answer might be of general interest to the community so I posted 
this five-minute video on my blog that shows you how.

http://signal-integrity-tips.com/2008/customizing-ads-components-ideal-delay-line/

 

Hope this helps,

 

-- Colin

Solution ... we go viral ... we get on the 'net ... and we blog it out ... 
http://signal-integrity-tips.com 

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: