[SI-LIST] Current sense resistors and power integrity

Hi all,

Is that a really bad idea to insert a small current sensing resistor, e.g. 3 
mOhm, followed by a bulk capacitor in each power rail of a let's say a DSP 
or a FPGA chip to be able to measure its power consumption?


Thanks,
=======================
Mikhail Matusov
Senior Hardware Design Engineer
Square Peg Communications
Tel.: +1 (613) 271-0044 ext.231
Fax: +1 (613) 271-3007
http://www.squarepeg.ca


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: