[SI-LIST] Re: Crosstalk Noise Amplitude
- From: danwei xue <dwxue@xxxxxxxxx>
- To: bdewitt@xxxxxxxxxxxxx, andyk@xxxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Sun, 27 Jun 2004 09:44:52 -0700 (PDT)
Agree with Brent. May a voltage transformer be an
example?
--- Brent DeWitt <bdewitt@xxxxxxxxxxxxx> wrote:
> Andy,
>
> While I've never experienced it, I expect it would
> be possible if the victim
> Z was greater than the aggressor Z by a factor
> larger than the coupling
> loss.
>
> With respect,
> Brent DeWitt
> > -----Original Message-----
> > From: si-list-bounce@xxxxxxxxxxxxx
> > [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of
> Andy Kuo
> > Sent: Friday, June 25, 2004 6:44 PM
> > To: si-list@xxxxxxxxxxxxx
> > Subject: [SI-LIST] Crosstalk Noise Amplitude
> >
> >
> > Hi all,
> >
> > I have a question:
> >
> > In a microstrip configuration or any RLC circuit,
> will the crosstalk noise
> > voltage amplitude induced from the aggressor
> signal be bounded?
> >
> > In other word, is it possible for the crosstalk
> noise to have an amplitude
> > greater than the amplitude of the aggressor
> signal?
> >
> > Thanks very much
> > Andy Kuo
> >
> >
>
------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe'
> in the Subject field
> >
> > or to administer your membership from a web page,
> go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
> >
> > List FAQ wiki page is located at:
> >
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> >
> > List technical documents are available at:
> > http://www.si-list.org
> >
> > List archives are viewable at:
> > http://www.freelists.org/archives/si-list
> > or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages
> > Old (prior to June 6, 2001) list archives are
> viewable at:
> > http://www.qsl.net/wb6tpu
> >
> >
>
>
------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
>
> or to administer your membership from a web page, go
> to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
>
> List FAQ wiki page is located at:
>
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are
> viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: Crosstalk Noise Amplitude
- From: Brent DeWitt
Other related posts:
- » [SI-LIST] Crosstalk Noise Amplitude
- » [SI-LIST] Re: Crosstalk Noise Amplitude
- » [SI-LIST] Re: Crosstalk Noise Amplitude
- » [SI-LIST] Re: Crosstalk Noise Amplitude
- [SI-LIST] Re: Crosstalk Noise Amplitude
- From: Brent DeWitt