[SI-LIST] Crosstalk

Hi all
I am beginner to SI analysis. I am using SpectraQuest to check cross-talk.
My Question is something like this:
Say we have 4 data lines D0,D1,D2 and D3 going from chips U1 to U2.
The trace length of all the four data lines are different and distance
between each line is less than 4 MIL.
Now these lines switch from 0000 to 0010 [D3D2D1D0].
My question is will D1 effects D0 and D2. Can anybody please help me out to
understand the concept of cross talk.
Also i am new to specctraquest.Can any one tell me the setup in SQ to
perfrom cross talk.I am confused with the help provided by SQ.
 
Thanks and regards 
Murali mohan Repala
 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: