[SI-LIST] Re: Converting Orcad to Ansoft

Tim,

I think your best bet is to export DXF file for each layer in Orcad
layout, and then rebuild the "lost" z-direction in the 3D modeler of
Ansoft tools.

There is an appnote called "How to import DXF and GDS files" available
on Ansoft's online tech support site www.ansoft.com/ots

Best regards,
Mike

-----------------------------------------------------------------
Michael Khusid
Ansoft Corporation
SI/HF Application Engineer
 
25 Burlington Mall Road, 6th floor
Burlington, MA 01803-4100
 
Tel 781-229-8900 Ext. 34
Fax 781-229-8624
--------------------- http://www.ansoft.com ---------------------
 

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of ttsp@xxxxxxxxxxx
Sent: Tuesday, February 11, 2003 12:16 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Converting Orcad to Ansoft

All,
I wonder does any one in the si-list have any experience in converting
Orcad
layout files into Ansoft HFSS or SI3D? I wonder is there a way to do so?
Does any one know there exists a software will do this conversion?
 
Thanks,
Tim Pak


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: