[SI-LIST] Configuration of IDSEL signal for mini-PCI

Hi all,
We are using a WiFi card(miniPCI) which is interfacing with the
processor.
Don't know how to go about with the connecting the IDSEL signal of the
PCI device. Only one mini-PCI device is used on the board. Is it that
address lines [16:31] can be used for generating IDSEL. But can anyone
be specific as how to assert the IDSEL signal with these address lines?
 
Regards,
Sathish
 
 



The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should 
check this email and any attachments for the presence of viruses. The company 
accepts no liability for any damage caused by any virus transmitted by this 
email.
 
www.wipro.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: