[SI-LIST] Re: Capacitance
- From: Scott McMorrow <scott@xxxxxxxxxxxxx>
- To: sitaskina@xxxxxxxxx
- Date: Wed, 25 Jan 2006 18:49:51 -0500
Ma,
If you have transmission line impedance and delay, you can calculate L
and C for any TEM or quasi-TEM continuous transmission line.
Z = sqrt (L/C)
delay = sqrt(LC)
Just do the math and tell us where you're from.
Scott
Scott McMorrow
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
(401) 284-1827 Business
(401) 284-1840 Fax
http://www.teraspeed.com
Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC
ma mu wrote:
> Hi all,
>
> Thanks . I have another question for you. I am creating a model with
> Ansoft designer and I need to find out my transmission line capacitance .
> Ansoft designer can not calculate the capacitance directly . But can give S,Y
> and Z parameter. there is a equation where capacitance could be find out
> with any of those parameters, I believe Y parameter. But I forgot the
> equation. I was looking at my High speed book but could not find it !!! any
> help would be appreciated.
>
> Ma
> "Jian X. Zheng" <jian@xxxxxxxxxx> wrote:
> Hi, Ma:
>
> No, I think it is different. |S11| = - 3 dB means |S11| is about 0.707 or
> |S11*S11| = 0.5 or 50% of the power is reflected. If there is little
> metallic, dielectric and radiation losses (normally the case unless for
> antennas), the |S21| should be 0.707 or |S21*S21| = 0.5 or 50% of the power
> is transmitted.
>
> Regards.
>
> ----------------------------------------------------------------------------
> Jian X. Zheng, Ph.D., Zeland Software, Inc.
> 48834 Kato Road, 103A, Fremont, CA 94538, U.S.A.
> Tel: 510-623-7162, Fax: 510-623-7135
> ----------------------------------------------------------------------------
>
>
>> -----Original Message-----
>> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
>> On Behalf Of ma mu
>> Sent: Wednesday, January 25, 2006 2:17 PM
>> To: si-list@xxxxxxxxxxxxx
>> Subject: [SI-LIST] -3dB at S21 graph
>>
>> Hi all,
>>
>> In my insertion loss, S21 graph, I got -3dB loss at 1.5 Ghz. My question
>> is :
>> transmission at 1.5 Ghz is 50% or 70% ? I thnik 50% . please give
>> me feedback.
>>
>> Ma
>>
>>
>>
>> ---------------------------------
>> Bring words and photos together (easily) with
>> PhotoMail - it's free and works with Yahoo! Mail.
>>
>> ------------------------------------------------------------------
>> To unsubscribe from si-list:
>> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>
>> or to administer your membership from a web page, go to:
>> http://www.freelists.org/webpage/si-list
>>
>> For help:
>> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>
>> List FAQ wiki page is located at:
>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>
>> List technical documents are available at:
>> http://www.si-list.org
>>
>> List archives are viewable at:
>> http://www.freelists.org/archives/si-list
>> or at our remote archives:
>> http://groups.yahoo.com/group/si-list/messages
>> Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>>
>
>
>
>
>
> ---------------------------------
> Bring words and photos together (easily) with
> PhotoMail - it's free and works with Yahoo! Mail.
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Capacitance
- From: ma mu
Other related posts:
- » [SI-LIST] Capacitance
- » [SI-LIST] Re: Capacitance
- » [SI-LIST] Re: Capacitance
- [SI-LIST] Capacitance
- From: ma mu