[SI-LIST] Capacitance

Hi all,
   
   Thanks .  I have another question for you. I am creating a model with Ansoft 
designer and I need to find out my transmission line capacitance . Ansoft 
designer can not calculate the capacitance directly . But can give S,Y and Z 
parameter. there is a  equation where capacitance could be find out with any of 
those parameters, I believe Y parameter.  But I forgot the equation. I was 
looking at my High speed book but could not find it !!!  any help would be 
appreciated.
   
  Ma
"Jian X. Zheng" <jian@xxxxxxxxxx> wrote:
  Hi, Ma:

No, I think it is different. |S11| = - 3 dB means |S11| is about 0.707 or
|S11*S11| = 0.5 or 50% of the power is reflected. If there is little
metallic, dielectric and radiation losses (normally the case unless for
antennas), the |S21| should be 0.707 or |S21*S21| = 0.5 or 50% of the power
is transmitted.

Regards.

----------------------------------------------------------------------------
Jian X. Zheng, Ph.D., Zeland Software, Inc.
48834 Kato Road, 103A, Fremont, CA 94538, U.S.A.
Tel: 510-623-7162, Fax: 510-623-7135
----------------------------------------------------------------------------

> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
> On Behalf Of ma mu
> Sent: Wednesday, January 25, 2006 2:17 PM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] -3dB at S21 graph
> 
> Hi all,
> 
> In my insertion loss, S21 graph, I got -3dB loss at 1.5 Ghz. My question
> is :
> transmission at 1.5 Ghz is 50% or 70% ? I thnik 50% . please give
> me feedback.
> 
> Ma
> 
> 
> 
> ---------------------------------
> Bring words and photos together (easily) with
> PhotoMail - it's free and works with Yahoo! Mail.
> 
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> 
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> 
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> 
> List technical documents are available at:
> http://www.si-list.org
> 
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
> 

  


                
---------------------------------
Bring words and photos together (easily) with
 PhotoMail  - it's free and works with Yahoo! Mail.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: