[SI-LIST] Can I get this from an IBIS model?

From: Doug Brooks <doug@xxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Fri, 27 Sep 2002 22:05:45 -0700

Suppose I have an IBIS model, but not the physical part. Is there a way I 
can determine the output impedance of the device (and if different, the 
output impedance for each digital state) from the IBIS model itself?

I know I can build a simulation and solve for the output impedance that 
way, but can I get it from the IBIS model itself without going through the 
simulation step? . And if so, where in a model do I look?

Thanks for any help.

Doug Brooks

_______________________________________________________________________________
UltraCAD Design announces availability of its new book "Signal Integrity 
Issues in PCB Design"
Details at  www.ultracad.com


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: Can I get this from an IBIS model?
From: Scott McMorrow

[SI-LIST] Can I get this from an IBIS model?

Other related posts: