[SI-LIST] Re: Bit Error Caused by NOISE
- From: Lianghu Xu <xlh9504@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 20 Nov 2001 17:41:39 -0800 (PST)
Pat,
Actually, I do use a voltage regulator. However,it's
used to convert 3.3V supply to 5.0V for ATC and
others.
This Supply is the interface from the customer.
So does the noise:)
Regards,
Lianghu
--- "Zabinski, Patrick J." <zabinski.patrick@xxxxxxxx>
wrote:
>
> Lianghu,
>
> In addition to the 3.3V supply, is there any other
> supplies you can use? For example, is there a 5.0V
> supply you can use to drive a voltage regulator,
> which in
> turn outputs a 3.3V supply for the ATC?
>
> You'll burn some power and add some parts, but it
> is likely to do wonders in isolating the ATC's 3.3V
> supply.
>
> Pat
>
>
> > Hello,
> >
> > I'm designing a burst mode receiver module for a
> > system customer.
> >
> > There is a Auotmatic Threshold Controller(ATC) in
> this
> > module. This ATC circuit together with Power NOISE
> > cause many many Bit Errors.
> >
> > The problem is that the Power is given by the
> system
> > board. The noises of VCC(3.3V) and GND(0V) are
> both
> > 500mVp-p! And the minimum sensitive of the ATC is
> only
> > 10mV.Well, the bit errors occur.
> >
> > Furthermore, the total current is about 500mA.Many
> > passive filters will lead to drop of VCC.
> >
> > Any suggestion?
> >
> > Thanks,
> >
> > Lianghu
> >
>
------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
>
> or to administer your membership from a web page, go
> to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are
> viewable at:
> http://www.qsl.net/wb6tpu
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
http://geocities.yahoo.com/ps/info1
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: Bit Error Caused by NOISE
- From: Zabinski, Patrick J.
Other related posts:
- » [SI-LIST] Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- » [SI-LIST] Re: Bit Error Caused by NOISE
- [SI-LIST] Re: Bit Error Caused by NOISE
- From: Zabinski, Patrick J.