[SI-LIST] BGA sockets or a source of compression type material

Dear List
 
I am intending to make physical timing/SI measurements for some DDR3 FPGA 
memory controller IP that I have been developing.
This will involve testing with memory devices from several vendors, and 
differing speed grades.
I do not have regular low cost access to BGA rework kit and was wanting to keep 
the costs down (it's off my own back and funded
out of my pocket). 
 
Are there any low cost sockets specifically for DDR bga's, or for that matter 
sources of 0.8mm pitch compressible matrix
material? Ideally thru catalogue or online distribution. fclk <= 533MHz.
 
Best Regards
 
David Greig
 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: