[SI-LIST] Re: Approx. value of board and socket capacitance
- From: "databits" <databits@xxxxxxxxxxxxx>
- To: <anshu.vij@xxxxxx>,"'Harjeet Randhawa'" <harjeet.randhawa@xxxxxxxxxxxxxxxxx>
- Date: Fri, 26 Dec 2003 09:18:59 -0600
WRT: Socket Capacitance
The numbers you are looking for can be quite different. Even for an
"approximation".
It is imortant to know:
1) Ground signal ratio
2) Socket Type (Chip package, edge card, other?)
3) Pin Pitch (1mm, 1,27mm, 2mm, other?)
4) Socket Height
5) Terminal Type (blanked or formed.... Meaning, are the signals
primarily edge coupled or broud side coupled)
1- 3 are required to help with a general approximation... Adding 4 and
5 is better still.
Best Regards,
_gus
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Anshu VIJ
Sent: Friday, December 26, 2003 4:32 AM
To: Harjeet Randhawa
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Approx. value of board and socket capacitance
HI Harjeet,
Thanks for the reply. i don't have the socket model. I just wanted to
take the approx. value for my simulation. If u have any idea about the
order of it then pls let me know.
Thanks
anshu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- References:
- [SI-LIST] Re: Approx. value of board and socket capacitance
- From: Anshu VIJ
Other related posts:
- » [SI-LIST] Approx. value of board and socket capacitance
- » [SI-LIST] Re: Approx. value of board and socket capacitance
- » [SI-LIST] Re: Approx. value of board and socket capacitance
- » [SI-LIST] Re: Approx. value of board and socket capacitance
- [SI-LIST] Re: Approx. value of board and socket capacitance
- From: Anshu VIJ