[SI-LIST] Ansoft HFSS - inductive xtalk setup

Hi SI experts,

I am currently using Ansoft HFSS. I want to extract inductive xtalk of two
1" parallel wires. In my simulation setup, I draw 2 wire conductors with
seperation S (center-to-center) and diameter D. The thickness of insulator
is P. The length of the wires is an inch long. An 1" air cylinder with 3*S
radius is draw to enclose the 2 wires + insulator. Can someone tell me how
to setup in "setup boundaries/sources".  Should I use Gap source/ Wave prot?
I have try both, but both of the result give me negative inductance. Can
someone give me some inputs?

Thanks in advance.

Tim


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: