[SI-LIST] Re: Analog Design Project

Jim,

You go, boy.=20

However, we don't want TONS of job email, either. =20
See the point?



> -----Original Message-----
> From: jim freeman [mailto:kacief@xxxxxxxxxxxxx]
> Sent: Saturday, January 24, 2004 12:05 PM
> To: Chris.Cheng@xxxxxxxxxxxx
> Cc: 'kevin_pierpoint@xxxxxxxxxxxxxx'; si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: Analog Design Project
>=20
>=20
> Hi Chris,
>     What a crock. You have no regard for anybody other than=20
> yourself. People
> are hurting all over and you try to shoot down a very good=20
> possibility. There
> may be people that are on this list who know someone else who=20
> could fit the
> bill. I am ashamed to have even a weak association with you.
>=20
> Jim Freeman
>=20
> Chris Cheng wrote:
>=20
> > I think we should revisit the ROE in this forum again. We=20
> first say no =3D
> > to
> > all headhunter, then bad times came and some people changed=20
> their mind. =3D
> > But
> > I never quite get a definitive ROE change from the moderator.=3D20
> > Personally I just like this place as a hang out for pro's=20
> and wannabes =3D
> > to
> > have fun and share ideas but not a self serving place for=20
> selling your =3D
> > jobs,
> > tools, service and books. But that's just me.=3D20
> >
> > -----Original Message-----
> > From: Kevin Pierpoint [mailto:kevin_pierpoint@xxxxxxxxxxxxxx]
> > Sent: Friday, January 23, 2004 3:04 PM
> > To: si-list@xxxxxxxxxxxxx
> > Subject: [SI-LIST] Analog Design Project
> >
> > Hello guys. Not sure if you guys can help me out again or=20
> not, but I =3D
> > have
> > another "hard-to-find" skillset for a 6 month project in=20
> San Jose. Here =3D
> > is
> > what they are in need of:
> > They need a strong analog circuit designer (all=20
> board-level). The hard =3D
> > part
> > is that they are looking for either one of the following - a low =3D
> > noise/high
> > bandwidth designer OR high bandwidth/high voltage designer.=20
> Here is how =3D
> > it
> > breaks down:
> >
> > Musts:
> > - Analog circuit design (all board-level)
> > - low noise/high bandwidth designer OR high bandwidth/high voltage =
=3D
> > designer
> > - feedback control design
> > - PSPICE and Orcad
> >
> > Plus:
> > - Digital design (both board and chip-level)
> > - Mathcad and/or matlab
> > - electron beam or ion beam systems (semiconductor industry)
> >
> > Note....here are the ranges he is referring to:
> > - Low noise =3D3D about mVolt signal amplification
> > - High voltage =3D3D 10-50 kilavolts
> > - high bandwidth =3D3D 200-300 kilohertz
> >
> > Just a reminder...the last time I posted a job, I got one of your =
=3D
> > fellow SI
> > guys a job, so maybe it will work again.
> >
> > Regards,
> >
> > _______________________________________
> > Kevin D. Pierpoint Branch Manager/Technical Recruiter=3D20
> >        Oxford & Associates=3D20
> > 1230 Oakmead Parkway, Suite 204
> > Sunnyvale, CA, 94085
> > Tel: (408) 245-3915
> > Fax: (408) 245-3977
> > E-mail:    kevin_pierpoint@xxxxxxxxxxxxxx=3D20
> > Website: www.oxfordcorp.com
> > "The Right Talent. Right Now.=3DAE"
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the=20
> Subject field
> >
> > or to administer your membership from a web page, go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> > List technical documents are available at:
> >                 http://www.si-list.org
> >
> > List archives are viewable at:    =3D20
> >                 http://www.freelists.org/archives/si-list
> > or at our remote archives:
> >                 http://groups.yahoo.com/group/si-list/messages
> > Old (prior to June 6, 2001) list archives are viewable at:
> >                 http://www.qsl.net/wb6tpu
> >  =3D20
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the=20
> Subject field
> >
> > or to administer your membership from a web page, go to:
> > http://www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> > List technical documents are available at:
> >                 http://www.si-list.org
> >
> > List archives are viewable at:
> >                 http://www.freelists.org/archives/si-list
> > or at our remote archives:
> >                 http://groups.yahoo.com/group/si-list/messages
> > Old (prior to June 6, 2001) list archives are viewable at:
> >                 http://www.qsl.net/wb6tpu
> >
>=20
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>=20
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>=20
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>=20
> List technical documents are available at:
>                 http://www.si-list.org
>=20
> List archives are viewable at:    =20
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>  =20
>=20
>=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: