[SI-LIST] Re: Analog Design Project

Hi Chris,
    What a crock. You have no regard for anybody other than yourself. People
are hurting all over and you try to shoot down a very good possibility. There
may be people that are on this list who know someone else who could fit the
bill. I am ashamed to have even a weak association with you.

Jim Freeman

Chris Cheng wrote:

> I think we should revisit the ROE in this forum again. We first say no =
> to
> all headhunter, then bad times came and some people changed their mind. =
> But
> I never quite get a definitive ROE change from the moderator.=20
> Personally I just like this place as a hang out for pro's and wannabes =
> to
> have fun and share ideas but not a self serving place for selling your =
> jobs,
> tools, service and books. But that's just me.=20
>
> -----Original Message-----
> From: Kevin Pierpoint [mailto:kevin_pierpoint@xxxxxxxxxxxxxx]
> Sent: Friday, January 23, 2004 3:04 PM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Analog Design Project
>
> Hello guys. Not sure if you guys can help me out again or not, but I =
> have
> another "hard-to-find" skillset for a 6 month project in San Jose. Here =
> is
> what they are in need of:
> They need a strong analog circuit designer (all board-level). The hard =
> part
> is that they are looking for either one of the following - a low =
> noise/high
> bandwidth designer OR high bandwidth/high voltage designer. Here is how =
> it
> breaks down:
>
> Musts:
> - Analog circuit design (all board-level)
> - low noise/high bandwidth designer OR high bandwidth/high voltage =
> designer
> - feedback control design
> - PSPICE and Orcad
>
> Plus:
> - Digital design (both board and chip-level)
> - Mathcad and/or matlab
> - electron beam or ion beam systems (semiconductor industry)
>
> Note....here are the ranges he is referring to:
> - Low noise =3D about mVolt signal amplification
> - High voltage =3D 10-50 kilavolts
> - high bandwidth =3D 200-300 kilohertz
>
> Just a reminder...the last time I posted a job, I got one of your =
> fellow SI
> guys a job, so maybe it will work again.
>
> Regards,
>
> _______________________________________
> Kevin D. Pierpoint Branch Manager/Technical Recruiter=20
>        Oxford & Associates=20
> 1230 Oakmead Parkway, Suite 204
> Sunnyvale, CA, 94085
> Tel: (408) 245-3915
> Fax: (408) 245-3977
> E-mail:    kevin_pierpoint@xxxxxxxxxxxxxx=20
> Website: www.oxfordcorp.com
> "The Right Talent. Right Now.=AE"
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List technical documents are available at:
>                 http://www.si-list.org
>
> List archives are viewable at:    =20
>                 http://www.freelists.org/archives/si-list
> or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>  =20
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List technical documents are available at:
>                 http://www.si-list.org
>
> List archives are viewable at:
>                 http://www.freelists.org/archives/si-list
> or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: