[SI-LIST] About Self coupling

Hello
Recently we are designing PCB @ 700 MHz (Digital) signals.
In that we are using banding (As shown in attached picture)for length
matching. As per thumb rule it should be more than 3X .

But I am confused that X means track width or Track(PCB Copper) height?

Anybody can clarify it?

-- Binary/unsupported file stripped by Ecartis --
-- Type: application/msword
-- File: 3w.doc


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: