[SI-LIST] Re: AW: Patch Antenna Design for UHF RFID reader
- From: "Vinod Kumar" <vinodsaharan@xxxxxxxxxxxxxxxx>
- To: "Havermann, Gert" <Gert.Havermann@xxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Fri, 13 Mar 2009 20:12:09 +0530
Hi,
Thanks Gert.
Can anybody comment on the typical Beam Widths that we can get with
microstrip patch antennas?
Aslo Its my first antenna design & I have not worked with any simulators.
From where can I download the free trial versions for CST or HFSS?
I have already done a bit of reaserach regarding the patch antenna designs.
I have downloaded some papers from IEEE also. But any suggestion or
recommendations for any good applications notes on this subject will be of
great help.
Regards,
Vinod
----- Original Message -----
From: "Havermann, Gert" <Gert.Havermann@xxxxxxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Sent: Thursday, March 12, 2009 9:15 PM
Subject: [SI-LIST] AW: Patch Antenna Design for UHF RFID reader
> Hi Vinod,
>
> Ist been a while since I did my last patch antenna, but since noone is
> responding I'll give it a shot.
>
> I don't see a problem with a microstrip patch antenna at the given
> bandwidth and RF power level. The gain might be hard to meet over the
> whole bandwidth, but should be ok with proper simulation. I prefer
> microstrip patch antenna because ist quite easy to build. For metal patch
> antennas you have to deal with a lot of tolerances (btw Aluminum works
> good for those antennas).
>
> If you use an 3D simulator (CST, HFSS...) most of them come with examples
> in patch antenna design. Sometimes those are a great starting point. If
> you go down the first option, take a look at GIL1000 PCB material. Ist
> perfect for antennas, and might help you to get the gain up to where it
> belongs.
>
> Just my 2ct
>
> BR
> Gert
>
>
> Please visit us at the Hannover Messe from April 20 to 24, 2009.
> You can find us in hall 11, stand C13.
> http://www.hannovermesse.de/
>
> --------------------------------------------------------------------------
> Absender ist HARTING Electronics GmbH & Co. KG; Sitz der Gesellschaft:
> Espelkamp; Registergericht: Bad Oeynhausen; Register-Nr.: HRA 5596;
> persönlich haftende Gesellschafterin: HARTING Electronics Management GmbH;
> Sitz der Komplementär-GmbH: Espelkamp; Registergericht der
> Komplementär-GmbH: Bad Oeynhausen; Register-Nr. der Komplementär-GmbH: HRB
> 8808; Geschäftsführer: Torsten Ratzmann
> -----Ursprüngliche Nachricht-----
>
>
> Von: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] Im
> Auftrag von Vinod Kumar
> Gesendet: Donnerstag, 12. März 2009 08:12
> An: si-list@xxxxxxxxxxxxx
> Betreff: [SI-LIST] Patch Antenna Design for UHF RFID reader
>
> Hi All,
> I want to design a patch antenna for UHF RFID reader. There are two
> options:
>
> 1. A microstrip patch antenna but the bandwidth will be less with this
> antenna.
> 2. A patch antenna with metal plates which can provide more bandwidth.
>
> My requirements are:
>
> A circularly polarized patch antenna with 6~9 dBi gain and 865 - 867MHz
> bandwidth cover. Antenna should be able to radiate +30dBm (1W) RF power.
>
> Can anybody suggest which option will be good?
> Also where can I find good application notes for patch antenna design?
>
> One more doubt I have here is how to select the metal for 2nd option.
> Which material will be best suited for this?
>
> Regards,
> Vinod
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts: