[SI-LIST] Re: AC-coupling caps



Agilent 11742A Blocking Capacitor, 10MHz to 26.5GHz 3.5mm connectors (SMA
compatible).  Takes up to 50 volts DC.


Charles Hill, consultant


-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Hassan Ali
Sent: Tuesday, February 26, 2002 3:50 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] AC-coupling caps



Hi All,

I'm looking for a vendor that supplies AC coupling (DC-blocking) capacitors
with very low
impedance (less than 2 ohm) in the 0.6-3GHz and 2.5-12.5GHz frequency bands.
I'd
appreciate any suggestions.

I'm also looking for a DC-blocking unit with SMA terminals for use with
oscilloscopes,
suitable for up to 12.5GHz. I'd appreciate any recommendations.

Thanks.

Hassan.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: