[SI-LIST] ACHIEVABLE TOLERANCE OF PCB TRACE WIDTH ?

Can anyone tell me what sort of tolerance can be achieved on PCB trace =
width at the present time ? Whats typical ? What can be done but stings =
the pocket ? What technology is required ? Who can actually do it ?

Thanks in advance

Steve Rogers B.Eng (Hons) C.Eng IEE
RF Design Engineer

Micromill Electronics Limited
Leydene House
Waterberry Drive=20
Waterlooville Hampshire
PO7 7XX

Tel: +44 (0) 23 9236 6600
Fax: +44 (0) 23 9236 6673

Registered No. 1456922 (England). =20
Registered Office Brook Road
Wimborne, Dorset BH21 2BJ

***********************************************************************

"This email and any attached files are confidential  and may be legally =
privileged.If you are not the addressee, any disclosure, =
reproduction,copying, distribution,, or other dissemination or use of =
this communication is strictly prohibited. If you have received this =
transmission in error please notify the sender immediately and then =
delete this email.

It is the policy of Micromill Electronics Limited that no legally =
binding statements, representations or commitments (collectively =
'statements') may be made by email. Any such statements must be =
confirmed either by facsimilie or by post before they will have legal =
effect. The sender of this email is not authorised to commit the company =
in any way and the addressee is hereby formally notified of that fact."

***********************************************************************




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: