> Its that time again and I have posted my latest Technical Tidbit (about 120 > posted now): Construction of a Series 50 Ohm Termination > > Abstract: A shielded series 50 Ohm termination can be a useful addition to a > troubleshooting kit. A simple way to construct such a termination is > presented. We have a series of kits for making these types of terminations, attenuators, filters, DC blocks, etc.: http://www.pulseresearchlab.com/SCK They're not at cheap as the one in that Technical Tidbit, but they're higher bandwidth, and you can have both series and shunt components for multi-pole networks, etc. -- Steven Kan (p) 310-515-5330 x24 Pulse Research Lab (f) 310-515-0068 1234 Francisco St., Torrance, CA 90502 (c) 818-620-3062 mailto:steven@xxxxxxxxxxxxxxxxxxxx http://www.pulseresearchlab.com Signal Buffering & Translation for Digital Design, Integration & Test ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu