[SI-LIST] Re: A question for the group

Depends on the contents.  Post some preview on your site.

Ibrahim

-----Original Message-----
From: MikonCons@xxxxxxx [mailto:MikonCons@xxxxxxx]=20
Sent: Friday, July 26, 2002 4:04 PM
To: si-list@xxxxxxxxxxxxx
Cc: MikonConsulting@xxxxxxxxxxxxx
Subject: [SI-LIST] A question for the group


SI Collegues:

I have always tried to stay at the cutting edge of high speed design=20
techniques that address EMC and SI problems in a cost-effective manner.
I=20
have attempted to slow down my consulting activity over the past three
years=20
with an eye on "retirement," but new and exciting tasks have continued
to=20
whet my appetite and I have fallen prey to their challenges. Therefore,
I=20
have decided that true retirement is still a few years off.

I am seriously thinking of gathering all my older work and melding it
with my=20
current high-speed work to produce a new tutorial (or two). I would be=20
updating the old presentation material (using PowerPoint), adding new
design=20
technique refinements commensurate with the ongoing improvements in
software=20
analysis tools, and including some dynamic simulations/demonstrations
(for=20
both SI and radiated emissions effects). I have also just completed some
new=20
work in circumventing the exclusive use of Ansoft and H-SPICE, et al,
for=20
accurate modeling and simulation of multiple coupled T-lines (including=20
adjacent layer traces and frequency-dependent losses caused by skin
effect=20
and dielectric losses). I am considering a paper for DesignCON 2003 on
this=20
topic.

FINALLY, THE QUESTION: Do you think there is reasonable interest in
still=20
another "Designing for SI/EMC" tutorial for sale?

Mike

Michael L. Conn
Owner/Principal Consultant
Mikon Consulting
Cell: (408)821-9843

                   *** Serving Your Needs with Technical Excellence ***


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:    =20
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages=20
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =20

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: