Dear Vishnu; I was just going through your below mail; I would like to know more how 90 degree bend will cause less reflection compared to 45 degree bends practically. Regards, Naren On 7/25/06, Vishnu Mohan <vishyin8@xxxxxxxxx> wrote: > > Dear Dhaval, > To my kowledge 90 degree bends are not recomended because of the acid > trap. > Some people says 90 degree bend can cause more reflection than 45 degree, > but it is not true. At high frequency 90 degrees produce less reflection > than 45 degree. > > Please find the attached document. > > With Regards > Vishnu Mohan > > On 7/25/06, jun li <lijun_hit@xxxxxxxxx> wrote: > > > > I read a little about this topic. To 90 degree bend, there will be > overlap > > area. It behaves as capacitive discontinuity. Moreover, the sharp point > at > > the corner will enlarge electrical field. > > > > regards > > > > > > Dhaval Bhodia <bhodia1@xxxxxxxxx> wrote: > > Dear Experts > > I want to know that why PCB tracks can not have > > 90 degree bend ? second why 45 degree bend is most > > preferable ? anybody has made any analysis on bending > > of PCB tracks ? what are the technical issues will > > come if some one makes 90 degree bend in PCB ? What > > are electrone and transmission line charasterisic > > stops to make that 90 degree turn in PCB tracks ? > > Regards > > Dhaval > > __________________________________________________ > > > > > > --------------------------------- > > Do you Yahoo!? > > Next-gen email? Have it all with the all-new Yahoo! Mail Beta. > > > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > List FAQ wiki page is located at: > > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > > > > List technical documents are available at: > > http://www.si-list.org > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > or at our remote archives: > > http://groups.yahoo.com/group/si-list/messages > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > > > > > -- Binary/unsupported file stripped by Ecartis -- > -- Type: application/pdf > -- File: 90deg.pdf > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > > List technical documents are available at: > http://www.si-list.org > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu