[SI-LIST] Re: 90 degree turn in PCB tracks

From: Harry Selfridge <harrys@xxxxxxxxxxxxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Mon, 24 Jul 2006 22:15:29 -0700

There is a worthwhile paper regarding 90 degree bends at: 
http://www.montrosecompliance.com/Technical_papers/corners-Japan.pdf

At 09:55 PM 7/24/2006, Dhaval Bhodia wrote:
>Dear Experts
>      I want to know that why PCB tracks can not have
>90 degree bend ? second why 45 degree bend is most
>preferable ? anybody has made any analysis on bending
>of PCB tracks ? what are the technical issues will
>come if some one makes 90 degree bend in PCB ? What
>are electrone and transmission line charasterisic
>stops to make that 90 degree turn in PCB tracks ?
>Regards
>Dhaval
snip 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

References:

[SI-LIST] 90 degree turn in PCB tracks
From: Dhaval Bhodia

[SI-LIST] Re: 90 degree turn in PCB tracks

Other related posts: