[SI-LIST] 48V power distribution
- From: "tompegbel" <tcuratolo@xxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 19 Oct 2004 14:04:48 -0000
Is there a good resource/document for addressing the concerns in
bussing 48V power in a multilayer board? The recently popular 12V or
lower intermediate bus approach has limitations as voltages get lower
and current gets higher. There appears to be new approaches of using
a higher bus voltage (24V or 48V) for distribution since this was
explored in the 80's with the advent of distributed power and now
more recently with VoIP type designs. Any assistance appreciated
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
