[SI-LIST] Re: 45 Degree Bends vs. Rounded Corners

See "90 Degree Corners, the Final Turn", available at
www.ultracad.com
That study has since been confirmed by one other study.

Doug Brooks



At 09:17 AM 9/20/2001 -0400, CHRIS CROWLEY wrote:

>Hello-
>Could someone help me out with some info on when I
>should use rounded corners when routing as opposed
>to 45 degree bends.  Does anyone have any info supporting/
>denying either case?  Thanks in advance.
>
>
>

***********************************************************
Doug Brooks' book, "Electrical Engineering for the Non-Degreed Engineer is 
now in its 3rd printing. Learn about it at www.ultracad.com

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: