[SI-LIST] Re: 12 port model with 4 port VNA

There is also a block in Ansoft Designer  to move from 4 to 8...  IT can be
modified to go to 12 and beyond.
BR
Gus

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Jia Gongxian
Sent: Wednesday, June 27, 2007 8:50 PM
To: sjulian@xxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: 12 port model with 4 port VNA

Hi Simba,

ADS of Agilent  can help you  get 8,12.... port-touchstone file from
measured 4-port s parameters. The model of ADS  will be uses here is named
"Eqn Based-Linear". By the way, you should well match the other ports you
want to measure.

Regards

Jia Gongxian

Huawei Technologies Co.,Ltd.
Tel:     86 755 28976415
FAX:     86 755 28976758
Web:   http://www.huawei.com

Warning:  The information contained in electronic mail message is intended
   only for the personal and confidential use of the designated recipient(s)
named
   above. It may be privileged and confidential. If you have received this
communication
   in error, please destroy any and all copies of this message including
attached 
   files in your possession.

----- Original Message -----
From: "Simba Julian" <sjulian@xxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Sent: Wednesday, June 27, 2007 10:58 PM
Subject: [SI-LIST] 12 port model with 4 port VNA


> Hello all,
> 
> With the exception of PLTS, what other software solutions do you use
> (free or proprietary) that can take a number of 4 port measurements and
> aggregate them into an 8, 12 , ... port touchstone file?  The number of
> times that I have to do this does not justify the cost of purchasing a
> 12 port VNA so I'm just curious to know what everyone else in this
> scenario uses to accomplish this task.
> 
> Thanks,
> Simba
> 
> Simba Julian
> Sr. Signal Integrity Engineer
> EMC Corporation
> Email:   sjulian@xxxxxxx
> 
> 
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> 
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> 
> 
> List technical documents are available at:
>                 http://www.si-list.net
> 
> List archives are viewable at:     
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>   http://www.qsl.net/wb6tpu
>   
> 
> 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: