[SI-LIST] 100Base-T signalling

Hi! I am trying to do some simulations from the phy
layer to RJ45 for 100base-T and I wanted to know what
should I use as the stimulus. Also, if the signal
entering the primary side of the magnetic is
referencing a ground planeat different p.d then the
secondary side-- do you'll see any issue? I think it
should not be an issue because the transformer
provides DC isolation and there will be no effects on
the signals at RJ45.
Are there any documents on 100Base-T signalling i.e. I
am looking for more signal description from phy layer
onwards.
Thanks in advance fro the help.
Bob

__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: