[SI-LIST] 1 oz vs. 1/2 oz cu

From: "Inchauspe, Greg E" <greg.e.inchauspe@xxxxxxxx>
To: Sig Integ Group <si-list@xxxxxxxxxxxxx>
Date: Tue, 27 Apr 2004 09:39:22 -0700

Hello SI,

I'm working on a 18 layer board stack-up and was wondering what the =
trade-offs are between going with 1 oz Cu signal layers and =BD oz Cu =
signal layers.  All power and ground are 1 oz Cu.

Thanks,
Greg
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Follow-Ups:

[SI-LIST] Re: 1 oz vs. 1/2 oz cu
From: Peter Arnold

[SI-LIST] 18um vs. 36um thick copper (Was: Re: 1 oz vs. 1/2 oz cu)
From: Indrek Rebane

[SI-LIST] 1 oz vs. 1/2 oz cu

Other related posts: