[sac-forum] Re: Reminder - ATM/Astro-imaging meeting tomorrow
- From: "Paul Lind" <pulind@xxxxx>
- To: <sac-forum@xxxxxxxxxxxxx>
- Date: Tue, 26 Jan 2010 08:38:12 -0700
Richard,
I have a two possibilities. One is a 5.6 lb Edmund counterweight 3.5" dia and
almost 3" thick. It has a 1" hole. There's also a 2.5" diameter round steel rod
left over from Steve Dodder's Bino-chair. It can easily be cut off and bored
out. Steve must have lost claim to it by now (right Steve).
Jeff is right about the lead, but I don't have any. That would be great fun
but Gail might object to foundry operations in the kitchen!
Paul
----- Original Message -----
From: Richard Harshaw
To: sac-forum@xxxxxxxxxxxxx
Sent: Monday, January 25, 2010 11:42 AM
Subject: [sac-forum] Re: Reminder - ATM/Astro-imaging meeting tomorrow
Paul,
I'm looking for a counterweight-about 2.5" - 3.0" diameter, 0.5" to 0.75"
thick. Do you have anything like that or some stock I can drill a hole in? If
so, I'll be over tomorrow night with checkbook in hand.
Richard Harshaw
Cave Creek, Arizona
From: sac-forum-bounce@xxxxxxxxxxxxx [mailto:sac-forum-bounce@xxxxxxxxxxxxx]
On Behalf Of Paul Lind
Sent: Monday, January 25, 2010 9:37 AM
To: az-observing@xxxxxxxxxxxxx; sac-forum@xxxxxxxxxxxxx
Subject: [sac-forum] Reminder - ATM/Astro-imaging meeting tomorrow
Other related posts:
