[rollei_list] Re: plate adapter roll film back

Elias,
You just happened to have an older plate adapter. Just rivet on a "fin" to trip the counter. 

Jerry


ERoustom wrote:

Hi All,
I made the attempt of switching from sheet film to roll film (Rolleiflex 2.8C) using the adapter roll film back the other day, and it wouldn't work. The whole roll just got fed through from bottom reel to top reel - the winder never stopped. I didn't know that was controlled by a fin, sticking up at the bottom of the camera back, which is missing from the plate adapter... any ideas? 

Thanks,

Elias
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: