[rollei_list] Re: What is causing this?

I processed the Tri-X in HC110 (dilution B) for 5:30 using a Hewes reel in a
Nikor tank.  I use Kodak indicator stop bath and Ilford Rapid fix.

I processed the Fomapan in Rodinal 1+50 for 8:00.  Everything else was the
same as the Tri-X.

I have some other frames where the marks are further down in the frame.

- Peter Schauss

>
>     Check the steaks and spots to see if they are mechanical
> damage to the film, especially the back side. A magnifying
> glass and light shown obliquely across the film will help.
> The dots may be from pin holes. These are probably caused in
> processing in some way. Its curious that the blemishes show
> up only in about the top third of each frame unless they are
> masked by the image elswhere and are actually everywhere.
>     How is this film processed?
> 
> ---
> Richard Knoppow
> Los Angeles, CA, USA
> dickburk@xxxxxxxxxxxxx
> 
> ---
> Rollei List
> 
> - Post to rollei_list@xxxxxxxxxxxxx
> 
> - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
> in the subject field OR by logging into www.freelists.org
> 
> - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
> 'unsubscribe' in the subject field OR by logging into www.freelists.org
> 
> - Online, searchable archives are available at
> http://www.freelists.org/archives/rollei_list


---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' 
in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 
'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: