Georges, I have an SL66 and accessories manual at home and believe it has a page on the metering hood. I will check this evening and let you know. I will copy and email it to you if I have. John On 29/03/2011 21:57, "Georges Giralt" <georges.giralt@xxxxxxx> wrote: > Hi ! > I own this nice SL66 with it's 80 mm Planar. > I'm proud and delighted to have got this camera which made me dream for > years. Alas, it was an unreachable dream until a few months ago. 8-) > Now I've found the metering hood, but it has suffered a harsh encounter > with concrete and some of the plastic female screw on the body are > broken. Last but not least, the ocular shutter is defective too. > As the meter itself is still working, I would like to open it, restore > the broken threads with Araldite (two component epoxy glue, slow curing) > or Cyanolyte glue and restore the shutter. > Dismantling the "thing" is not obvious, and I wouldn't like to make > more harm than it has suffered... > So all the help I can get would be greatly appreciated. > Many thanks in advance for your help and advice ! > P.S. Do you know a source for the rubber hood on the ocular ? Mine is > quite worn out. --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list