[rollei_list] Re: Scanning hassle
- From: Ferdi Stutterheim <fstutterheim@xxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Sat, 21 Feb 2009 15:50:59 +0100
I have not used Epson Scan for quite a few years but I remember there
was something you could not do when scanning MF slides. IIRC it is
about the choice between "Thumbnail" and "Normal". I am talking of
the blue two way switch between the larger "Preview Scan" and "Scan"
buttons down on the screen. With MF it has to be set to "Normal". I
have version 2.77D. I am not sure it has anything to do with your
problem. I do remember the scanner did not work on "Thumbnail" and it
took me a long time to figure it out.
Ferdi.
Op 19-feb-2009, om 18:33 heeft gram rupert het volgende geschreven:
OK. folks,
I have read and tried most people suggestions.
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list
Other related posts: